The Secretary of the Interior's
Standards for Rehabilitation
The Secretary of the Interior is responsible for establishing
standards for all national preservation programs under Departmental
authority and for advising Federal agencies on the preservation
of historic properties listed or eligible for listing in the National
Register of Historic Places.
The Standards for Rehabilitation, a section of the Secretary's
Standards for Historic Preservation Projects, address the most
prevalent preservation treatment today: rehabilitation. Rehabilitation
is defined as the process of returning a property to a state of
utility, through repair or alteration, which makes possible an
efficient contemporary use while preserving those portions and
features of the property which are significant to its historic,
architectural, and cultural values.
The Standards that follow were originally published in 1977 and
revised in 1990 as part of Department of the Interior regulations
(36 CFR Part 67, Historic Preservation Certifications). They pertain
to historic buildings of all materials, construction types, sizes,
and occupancy and encompass the exterior and the interior of historic
buildings. The Standards also encompass related landscape features
and the building's site and environment as well as attached, adjacent
or related new construction.
The Standards are to be applied to specific rehabilitation projects
in a reasonable manner, taking into consideration economic and
technical feasibility.
1. A property shall be used for its historic purpose or be placed
in a new use that requires minimal change to the defining characteristics
of the building and its site and environment.
2. The historic character of a property shall be retained and
preserved. The removal of historic materials or alteration of
features and spaces that characterize a property shall be avoided.
3. Each property shall be recognized as a physical record of its
time, place, and use. Changes that create a false sense of historical
development, such as adding conjectural features or architectural
elements from other buildings, shall not be undertaken.
4. Most properties change over time; those changes that have acquired
historic significance in their own right shall be retained and
preserved.
5. Distinctive features, finishes, and construction techniques
or examples of craftsmanship that characterize a property shall
be preserved.
6. Deteriorated historic features shall be repaired rather than
replaced. Where the severity of deterioration requires replacement
of a distinctive feature, the new feature shall match the old
in design, color, texture, and other visual qualities and, where
possible, materials. Replacement of missing features shall be
substantiated by documentary, physical, or pictorial evidence.
7. Chemical or physical treatments, such as sandblasting, that
cause damage to historic materials shall not be used. The surface
cleaning of structures, if appropriate, shall be undertaken using
the gentlest means possible.
8. Significant archeological resources affected by a project shall
be protected and preserved. If such resources must be disturbed,
mitigation measures shall be undertaken.
9. New additions, exterior alterations, or related new construction
shall not destroy historic materials that characterize the property.
The new work shall be differentiated from the old and shall be
compatible with the massing, size, scale, and architectural features
to protect the historic integrity of the property and its environment.
10. New additions and adjacent or related new construction shall
be undertaken in such a manner that if removed in the future,
the essential form and integrity of the historic property and
its environment would be unimpaired.
Note: To be eligible for Federal tax incentives, a rehabilitation
project must meet all ten Standards. The application of these
Standards to rehabilitation projects is to be the same as under
the previous version so that a project previously acceptable would
continue to be acceptable under these Standards.
Certain treatments, if improperly applied, or certain materials
by their physical properties, may cause or accelerate physical
deterioration of historic buildings. Inappropriate physical treatments
include, but are not limited to: improper repainting techniques;
improper exterior masonry cleaning methods; or improper introduction
of insulation where damage to historic fabric would result. In
almost all situations, use of these materials and treatments will
result in denial of certification. In addition, every effort should
be made to ensure that the new materials and workmanship are compatible
with the materials and workmanship of the historic property.
Guidelines to help property owners, developers, and Federal
managers apply the Secretary of the Interior's Standards for Rehabilitation
are available from the National Park Service, State Historic Preservation
Offices, or from the Government Printing Office. For more information
write: National Park Service, Preservation Assistance Division-424,
P.O. Box 37127, Washington, D.C. 20013-7127.
Link to Federal Historic Preservation Tax Credits, posted
by the National Park Service. Includes illustrated guidelines for rehabilitating historic buildings.
Historic Preservation Tax Credits Page
Historic Building Restorations in North Carolina Page
N.C. State Historic Preservation Office Home Page
Office of Archives and History Home Page